CUMMINS EGMBS Specifications download pdf (Page 15)

− xiii −

− Repeat the steps in this paragraph until you have determined a SRT for all the work performed.

5. Determine the appropriate troubleshooting SRT:

− Read the repair order to determine what troubleshooting work was performed.

− Find the contents page for Group 00.

− Read the contents page for procedure to determine the work included in each step.

− If the work performed and the work included in the troubleshooting SRT are the same, all or in part,

determine and record the time of the SRT step. Remember that troubleshooting SRT are cumulative.

6. Determine the appropriate miscellaneous SRT:

− Read the repair order to determine if any application hardware was removed and installed in order

to access the engine or generator set.

− Find the contents page for Group 17.

− Read the contents page for procedure titles that seem to correspond to the work performed.

− Find the SRT within the group.

− Read the SRT procedure to determine the work included in the SRT.

− If the work performed and the work included in the SRT are the same, all or in part, determine and

record the time.

− If the work required to application hardware is not given in the SRT manual, determine the time for

ONLY this work from the repair order. Record the time for possible use as “99−999” or “Non−SRT

Time”.

7. Determine the appropriate administrative SRT:

− Both of the administrative SRT are shown at the beginning of Group 00.

− Determine the appropriate SRT.

− Record the time.

8. Determine the total appropriate SRT time:

− Check to be sure that there is no duplication of tasks within the SRT procedures selected. If there

is work duplicated by some of those selected, use other information contained in the manual to re-

duce the time of one of the SRT accordingly. If the information is not available, make an estimate.

− Total all the times obtained during performance of Steps 2 through 7.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 62 63

No comments

CUMMINS EGMBS Specifications Page 15