5
2. COMPONENTS
(See Fig.
1
)
3. PRE-OPERATION CHECKS
(See Fig.
2
)
1. CHECK ENGINE OIL (See Fig.
2
-
q
,
w
)
Please refer to the illustrations on the back
page of
the front cover or back cover for
Fig.
1
to
6
indicated in the sentence.
NOTE
q CONTROL PANEL
w FUEL TANK
e FUEL GAUGE
r SIDE PANEL (R)
t OIL DRAIN PLUG
y RECOIL STARTER (HANDLE)
u STOPPER
i TANK CAP
o SPARK PLUG CAP
!0 AIR CLEANER
!1 FUEL STRAINER
!2 BATTERY
!3 OIL GAUGE (OIL FILLER)
!4 SIDE PANEL (L)
!5 EXHAUST OUTLET
Before checking or refilling oil, be sure generator
is located on stable and level surface with engine
stopped.
■
Remove oil filler cap and check the engine oil
level.(See Fig. 2-q)
q OIL GAUGE
w OIL FILLER
e UPPER LEVEL
r LOWER LEVEL
■
If oil level is below the lower level line, refill
with suitable oil (see table) to upper level line.
Do not screw in the oil filler cap when
checking oil level.(See Fig. 2-w)
q UPPER LEVEL
w LOWER LEVEL
■
Change oil if contaminated.
(See "How-To" Maintenance.)
Recommended engine oil:
Use 4-stroke automotive detergent oil of API service
class SE or higher grade (SG, SH or SJ is
recommended). SAE 10W-30 or 10W-40 is
recommended for general, all-temperature use. If
single viscosity oil is used, select the appropriate
viscosity for the average temperature in your area.
Ambient
temperature
Single grade
Multigrade
5W
10W
20W
#20
#30
#40
10W
-
30
10W
-
40
P3200ie . . . . . . . . . . . . . . . . . . . . . . . 0.6
P4300ie . . . . . . . . . . . . . . . . . . . . . . . 1.0
Oil capacity (Upper level) :
(L)
P4300i au_GU2392 07.7.14 7:48 PM ページ5
Comments to this Manuals