CUMMINS N14 Specifications download pdf (Page 151)

100

101

Engine Support Bracket, Front -

Installation

Install the engine support bracket and the eight mounting

capscrews.

Tighten the capscrews.

Torque Value: 68 N•m [50 ft-lb]

Vibration Damper - Installation

Install two guide pins into the end of the crankshaft. Install

the pulley and the vibration damper.

NOTE: Make sure the mounting surfaces of the crankshaft

nose, the vibration damper, and the pulley are clean, dry,

and free of burrs.

Caution: Do not use an anti-seize compound, penetrat-

ing oil, or oil containing a friction modifier to lubricate

the capscrews. This will result in incorrect capscrew

torque and possible capscrew failure.

Lubricate the threads of the capscrews and the washer

with a film of SAE 15W-40 oil.

Install four of the six mounting capscrews. Remove the

two guide studs, and install the remaining two capscrews.

Install the washers and the capscrews. Keep the crank-

shaft from rotating, and tighten the capscrews to the

following torque values, in the order shown:

Capscrew

Size

SAE

Grade

No. N•m [ft-lb]

5/8-inch 8 258 [190]

Engine Assembly (00-02) Engine Support Bracket, Front - Installation

N14 Page 0-131

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 586 587

Comments to this Manuals

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Specifications Page 151

Comments to this Manuals