CUMMINS N14 Specifications download pdf (Page 167)

100

101

Crankcase Breather Tube - Installation

Install the breather vent tube on the breather tube, and

tighten the hose clamps.

Torque Value: 4.5 N•m [40 in-lb]

Install and tighten the tube support brackets and cap-

screws.

Torque Value: 47 N•m [35 ft-lb]

Lubricating Oil Filter - Installation

NOTE: The o-ring can stick on the filter head. Make sure it

is removed before installing a new filter.

Clean the oil filter head surface.

Use clean vegetable oil to lubricate the gasket surface of

the filter.

Fill the filter with clean 15W-40 oil.

Install the filter on the oil filter head. Tighten the filter until

the gasket contacts the filter head surface.

Caution: Mechanical overtightening may distort the

threads or damage the filter element seal.

Use oil filter wrench, Part No. 3375049, to tighten the filter

an additional three-fourths to one (3/4 to 1) turn, or follow

the instructions supplied with the filter.

Coolant Filter - Installation

Apply a light film of clean 15W-40 oil to the coolant filter

gasket sealing surface before installing the coolant filter.

Install the filter as specified by the manufacturer.

NOTE: Mechanical overtightening can distort the threads or

damage the filter head.

Engine Assembly (00-02) Crankcase Breather Tube - Installation

N14 Page 0-147

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 586 587

Comments to this Manuals

No comments

CUMMINS N14 Specifications Page 167

Comments to this Manuals