Turbocharger - Inspection Specifications
Turbocharger Shaft End Clearance
Model No.
BHT3B/HT3B 0.03 MIN 0.001
0.10 MAX 0.004
BHT4C/HT4B 0.05 MIN 0.002
0.13 MAX 0.005
Turbocharger Compressor Impeller Radial
Clearance
Model No.
BHT3B/HT3B 0.15 MIN 0.006
0.46 MAX 0.018
BHT4C/HT4B 0.15 MIN 0.006
0.46 MAX 0.018
Turbocharger Turbine Wheel Radial
Clearance
Model No.
BHT3B/HT3B 0.20 MIN 0.008
0.53 MAX 0.021
BHT4C/HT4B 0.20 MIN 0.008
0.53 MAX 0.021
Note: Specifications and instructions for rebuilding the turbocharger are provided in the Turbo-
charger Component Shop Manuals, Bulletin Nos. 3810230 or 3810241, for Holset turbochargers.
Aftercooler Assembly Capscrews
Torque Value: 40 N•m [30 ft-lb]
Exhaust Manifold Flange To Turbocharger
Mounting Stud Torque
Torque Value: 40 N•m [30 ft-lb]
Note: Apply a coat of anti-seize compound to the threads. Use two mounting nuts locked together
to tighten the studs.
Air Compressor - Inspection Specifications
Single Cylinder Air Compressor
Crankshaft End Clearance
0.05 MIN 0.002
0.15 MAX 0.006
Note: Specifications and instructions for rebuilding the single cylinder air compressor are
provided in the Air Equipment Rebuild Manual, Bulletin No. 3810242.
Two Cylinder Air Compressor Crankshaft
End Clearance
0.05 MIN 0.002
0.19 MAX 0.008
Note: Specifications and instructions for rebuilding the two cylinder air compressor are provided
in the Air Equipment Rebuild Manual, Bulletin No. 3810257.
Turbocharger - Inspection Specifications Specifications
Page 18-66 NT 855
Part or Assembly Ref. Point mm in
Comments to this Manuals