CUMMINS N14 Specifications download pdf (Page 33)

100

101

Exhaust Manifold - Removal

NOTE: Two dowels are used in each cylinder head to align

the exhaust manifold assembly.

Remove two capscrews, and install two guide studs.

Warning: Because this assembly weighs more than 23

kg [50 lbs], two people or a hoist will be required to lift

the exhaust manifold assembly to avoid personal injury.

Remove the remaining ten capscrews, the exhaust man-

ifold assembly, and the manifold gaskets.

Starting Motor - Removal

Warning: Because this part weighs more than 23 kg [50

lbs], two people or a hoist will be required to lift the

starting motor to avoid personal injury.

Remove the three starting motor capscrews, the starting

motor, and the spacer (if used).

Fan and Fan Spacer - Removal

Caution: A fan hub spacer can be behind the fan. It will

drop as the fan is removed. Make sure to remove the fan

and the fan hub spacer together.

Remove the six capscrews and the fan.

NOTE: Do not discard the fan spacers. The spacers provide

the thickness needed to install the fan in the correct position.

Alternator Belts - Removal

Loosen the alternator to alternator support nut and cap-

screw.

Loosen the adjusting link capscrew and tensioning bolt,

if applicable.

Push the alternator toward the engine to release tension

on the alternator belt, and remove the belt(s).

Engine Disassembly (00-01) Exhaust Manifold - Removal

N14 Page 0-13

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 586 587

Comments to this Manuals

No comments

CUMMINS N14 Specifications Page 33

Comments to this Manuals