CUMMINS N14 Specifications download pdf (Page 206)

100

101

Inspection

Visually inspect for pitting or erosion in the crevice seal

groove.

Replace the liner if pitting or erosion is greater than

one-half the width of the crevice seal groove.

Visually inspect the outside diameter for excessive cor-

rosion or pitting. Pits must not be more than 1.60 mm

[0.063-inch] deep.

Replace the liner if the pits are too deep or if the corrosion

can not be removed with a fine emery cloth.

Liners which have light pitting or erosion can be used

again, but they must be installed with the pitting or ero-

sion positioned in line with the crankshaft.

Visually inspect for cracks on the inside and the outside

of the liner.

Replace the liner if cracks are found.

Cylinder Liners - Cleaning and Inspection (01-06) Cylinder Block

N14Page 1-38

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 586 587

Comments to this Manuals

No comments

CUMMINS N14 Specifications Page 206

Comments to this Manuals